Installation; Installing The Hlu-200; Removing The Hlu-200; Installing The Hlu-200 Into A Litespan 2000 Cba - ADC HiGain HLU-200 List 2D User Manual

Installation

I
NSTALLATION
This section explains how to install the HLU-200 card into a compatible CBA. The HLU-200 mounts in a Litespan
2000 CBA.
I
NSTALLING THE
To install the HLU-200, follow these steps:
1 Hold the HLU-200 along the edges of the card. Avoid contact with connectors and chips.
2 Slide the card into the guides for the desired slot.
3 Push the card all the way into the CBA slot until the edge connector of the card becomes seated into the slot
connector on the backplane of the CBA.
R
EMOVING THE
If the HLU-200 List 2D is removed from a slot, it must not be reinserted for at least 15 seconds.
Reinserting it sooner may temporarily lock the HLU-200 List 2D into an unstable state.
8
HLU-200
HLU-200
H iG H L
a in U -4
3 1
L IN
E U
N IT
Figure 5. Installing the HLU-200 into a Litespan 2000 CBA
HLU-200
February 10, 1999
CO Shelf
150-200-124-02, Issue 2
HLU-200 List 2D