State Of Charge (Soc); Fault Protection - Energizer HardCase Professional EVEREST 300 User Manual

SOC Indicator
• The SOC Indicator displays the estimated % Charge of the Portable Power Station.
• Whilst the Portable Power Station is powering your devices, the SOC Indicator alternately displays % Charge and Hours to Empty.
• Hours to Empty is an approximate estimate of the amount of time before the % Charge will be zero, based on the amount of power
currently being drawn by your devices.
• Whilst the Portable Power Station is charging, the SOC Indicator alternately displays % Charge and Hours to Full.
• Hours to Full is an approximate estimate of the amount of time before the % Charge will be 100%, based on the amount of Input
(Charging) Power at the time.
Outlets will continue to operate at less than 10% Charge.
Charging
• The Portable Power Station can be charged using the supplied AC/DC power adapter with 5.5mm plug. Alternatively, it can be
charged using a DC solar panel, a DC auto charger or a AC/DC power adapter with USB-C plug (all not supplied).
• To charge, insert the plug of the adapter/charger into the relevant Input - DC 5.5mm or USB-C 45W.

Fault Protection

Power Outlets will stop working if over-current, short-circuit,
overheating or other issues occur during use. The Error Indicator
will illuminate and the SOC Indicator will display a Fault Code, as
per the Table below:
Fault Code Fault Cause
01 USB-C (18W) over-current or short-circuit
02 USB-A over-current or short-circuit
03 USB-C (45W) over-current or short-circuit
04 12V DC 5.5mm over-current or short-circuit
05 12V DC Auto over-current or short-circuit
06 Inverter over-current, short-circuit or over-temperature
07
08 Abnormal charging, over-power, over-current, over-temperature
09 System over-voltage
10 System under-voltage
11 System over-load
Contact
8 Star Energy ESS Limited
The Black Church
St. Mary's Place
Dublin D07 P4AX
Ireland
Phone: +353 1 254 8222
hello@energizerpowerstation.com
www.energizerpowerstation.com

State of Charge (SOC)

Battery Icon
% Charge Illumination
81%–100% 5 segments
56%–80% 4 segments
41%–55% 3 segments
26%–40% 2 segments
11%–25% 1 segment
5%–10% 0 segments
8 Star Energy Pty Ltd
PO Box 8098
Kooyong, Victoria 3144
Australia
Phone: 1300 757 827
hello@energizerpowerstation.com
www.energizerpowerstation.com
When overheating occurs, the Temperature Warning Indicator
will appear.
To remedy over-current and short-circuit faults:
Power Outlet.
• Turn the relevant Power Outlet OFF and ON again.
• If the issue isn't resolved, turn the Main Power OFF
and ON again.
To remedy overheating faults:
• Turn the Main Power OFF.
• Allow an extended period for the Portable Power
Station to cool before using again.
© 2021 Energizer. Energizer and certain graphic
designs are trademarks of Energizer Brands, LLC and
related subsidiaries and are used under license by 8
Star Energy Pty Ltd. All other brand names are
trademarks of their respective owners. Neither 8 Star
with the respective owners of their trademarks.