Advertisement
Mechanical design
Key
Siemens
Building Technologies
The unit consists of 3 parts:
•
Plastic housing with digital display accommodating the electronics, operating ele-
ments and built-in room temperature sensor
•
Baseplate (mounting base)
•
Removable battery compartment
The housing engages in the baseplate and snaps on. The baseplate carries the screw
terminals. There is a reset button on the rear of the unit.
1
Display of the room temperature in °C
2
Indicates a request for heat
3
Temperature setting knob
4
Battery compartment
5
Comfort temperature setpoint
6
Indicates low battery power; replace batteries
Room temperature controllers
3/7
CE1N3069en
14.12.2007
Advertisement
