Installation Work - Hitachi RAS-3.0HNSKQ Original Instruction

3.3 Installation Work

(1)Secure the outdoor unit with the anchor bolts.
In order to avoid the vibration from transmitting to the indoor by the base of the unit, the 5～10mm
thickness of rubber gaskets (field supplied) should be placed under the feet of the outdoor unit, which could
decrease the vibration into the room.
(2)Installation positions of feet, air inlet and drain holes are shown in the following figures:
Model: RAS-3.0~7.0HNSKQ
Model: RAS-3.0~7.0HNSKQ
17
Unit: mm