Table of Contents
Advertisement
PRODUCT MARKINGS:
The CE mark is a registered trademark of the
European Community.
Australian Communication and Media
Authority mark to indicate regulatory
compliance as a registered supplier.
This symbol indicates product compliance
with the Canadian Interference-Causing
Equipment Standard (ICES-001). It also
identifies the product is an Industrial Scientific
and Medical Group 1 Class A product (CISPR
11, Clause 4).
South Korean Class A EMC Declaration. This
equipment is Class A suitable for professional
use and is for use in electromagnetic
environments outside of the home.
업 무 용 방 송 통 신 기 자 재 ) 이 기 기 는 업 무 용
급
전 자 파 적 합 기 기 로 서 판 매 자 또 는 사
(A
)
용 자 는 이 점 을 주 의 하 시 기 바 라 며 , 가 정
외 의 지 역 에 서 사 용 하 는 것 을 목 적 으 로 합
니 다
.
This symbol indicates separate collection for
electrical and electronic equipment, mandated
under EU law as of August 13, 2005. All
electric and electronic equipment are required
to be separated from normal waste for
disposal (Reference WEEE Directive,
2002/96/EC).
This symbol indicates the instrument is
sensitive to electrostatic discharge (ESD). ESD
can damage the highly sensitive components
4
in your instrument. ESD damage is most likely
to occur as the module is being installed or
when cables are connected or disconnected.
Protect the circuits from ESD damage by
wearing a grounding strap that provides a
high resistance path to ground. Alternatively,
ground yourself to discharge any built-up
static charge by touching the outer shell of
any grounded instrument chassis before
touching the port connectors.
This symbol on an instrument means caution,
risk of danger. You should refer to the
operating instructions located in the user
documentation in all cases where the symbol
is marked on the instrument.
This symbol indicates the time period during
which no hazardous or toxic substance
elements are expected to leak or deteriorate
during normal use. Forty years is the expected
useful life of the product.
CLEANING PRECAUTIONS:
급 기 기 (
A
To prevent electrical shock, disconnect the
Keysight Technologies instrument from mains
before cleaning. Use a dry cloth or one
slightly dampened with water to clean the
external case parts. Do not attempt to clean
internally. To clean the connectors, use
alcohol in a well-ventilated area. Allow all
residual alcohol moisture to evaporate, and
the fumes to dissipate prior to energizing the
instrument.
Keysight M9391A Software Release Notes
Advertisement
Table of Contents
