Table of Contents
Advertisement
Installation and Turn-up
I
NSTALLING THE
The FRE-868 RT Enclosure has four mounting slots for #10 wood screws for indoor wall mounting.
1
Attach the RT Enclosure to the wall, using the mounting slots. Follow local practices to ensure a secure
mounting.
Mounting slot
HDSL protection
Channel units
Mounting slot
2
Connect the HDSL pairs to the HDSL Terminations (see
3
Connect a female Amphenol-ended subscriber cable to the subscriber line connector (not supplied)
(see
Figure
4).
4
Terminate the connector as shown in
5
FRE-868 List 3 and List 4 provide for HDSL protection. Install 5-pin protector plugs on all connected pairs.
8
FRE-868 RT E
Line unit
Figure 4. FRE-868 RT Enclosure
Table
5.
March 28, 2000
NCLOSURE
Subscriber line connector
(Amphenol male connector)
Figure
4).
363-860-100-02, Revision 02
Mounting slot
HDSL terminations
Mounting slot
FRE-860, FRE-865, FRE-867, and FRE-868
Advertisement
Table of Contents
