PairGain PG-Flex FRE-860 Quick Installation Manual

PG-Flex
The PairGain
R T
EQUIRED OOLS
• No. 2 Phillips screwdriver
I P
NSTALLING EDESTAL AND
1 Install the Magnum 14-inch pedestal in the ground
according to the manufacturer's recommendations.
2 Remove all cross supports from between the uprights
by removing a nut from each side. Discard the cross
supports.
3 The pedestal framework is now
ready for installation of the
FRE-860 RT Enclosure.
®
Pedestal for FRE-860 Remote Enclosure Quick Installation Guide
®
PG-Flex FRE-860 Remote Enclosure is designed to be mounted in a Magnum 14-inch pedestal in an outdoor location.
4 Remove the two
screws on each
side of the RT
Enclosure,
F
RAME remove and
discard the
mounting
brackets.
5 Install the
provided
mounting
brackets, using
the two
3
No. 10-32 x
machine screws.
6 Repeat the
procedure for the
other side.
7 Face the
mounting bracket with the hook features facing
forward as shown.
/
8
8 Hang the RT
Enclosure on
the hooks as
shown.
9 Using the
1
No. 10-32x /
machine
2
screws,
assemble the
screws into
the two
places on
each side of
the
Enclosure.
10 Start all four
screws, and
then tighten
them
securely.
11 You are now ready to proceed with turn-up as
described in the FRE-860 Technical Practice.