Table of Contents
Advertisement
Installation and Turn-up
I
NSTALLING THE
The FRE-865 and FRE-867 RT Enclosures have external mounting tabs with clearance holes for
(see
Figure
3).
1
When mounting to a pole using the Pole Mounting Kit (150-2397-0x), ensure the kit and FRE-86x are fully
installed before connecting the cables. The customer must provide the appropriate mounting hardware.
Follow local practices to ensure a secure mounting. The FRE-867 has lifting tabs to facilitate the mounting
of the enclosure.
Top mounting tab
Bottom mounting tab
HDSL stub
2
Connect the HDSL cable stub as listed in
System 1), the FRE-867 has two systems, System 1 and System 2.
6
FRE-865
FRE-867 RT E
AND
Subscriber
protectors
HDSL
protectors
Ground bar
Subscriber stub
Figure 3. FRE-865 and FRE-867 RT Enclosures
Table
March 28, 2000
NCLOSURES
Top mounting tab
Bottom mounting tab
HDSL stub
3. The FRE-865 contains only one system (designated as
FRE-860, FRE-865, FRE-867, and FRE-868
363-860-100-02, Revision 02
3
/
-inch bolts
8
Lifting tabs
Ground bar
Subscriber stub
Advertisement
Table of Contents
