Before First Use; Daily Use - Philco PTL7100P User Manual

10
• Set this option to deactivate all spin
phases. Only the drain phase is
available.
• Set this option for very delicate fabrics.
• The rinses phase uses more water for
some washing programmes.
QUICK
With this option you can decrease the
programme duration.
Use this option for items with light soil or
items to refresh.
The related indicator comes on.
RINSE HOLD
Select this option to reduce creasing:
• The washing programme ends with
water in the drum. The drum turns
regularly to reduce creasing.

BEFORE FIRST USE

1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Put a small quantity of detergent in the
compartment for washing phase.

DAILY USE

WARNING! Refer to Safety
chapters.
Loading the laundry
1. Open the appliance lid.
2. Push the button A.
• The door stays locked. You must drain
the water to unlock the door.
To drain the water refer to
"Draining water out after the
end of the cycle".
EXTRA RINSE
With this option you can add some rinses
to a washing programme.
Use this option for persons allergic to
detergents and in areas where the water
is soft.
The related indicator comes on.
DELAY START
With this option you can delay the start of
a programme by 9, 6 or 3 hours.
The indicator of the set value is on.
4. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
The drum opens automatically.
3. Put the laundry in the drum, one item
at a time.
4. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry in
the drum.
5. Close the drum and the lid.
CAUTION! Before you close
the lid of your appliance, make
A
sure that you close the drum
correctly.
Detergent compartments. Using
detergent and additives
1. Measure out specified detergents for
washing machine the detergent and the
fabric conditioner.