Table of Contents
Advertisement
Quick Links
Your Serial and Data Communications Expert
IT-PMC-1200 P2
2-ports 10/100M Media Converter
(SS: single-mode single fiber)
1
Introduction:
The Media Converter complies with IEEE802.3, IEEE802.3u, and
IEEE802.3x Standards. It is designed to convert data signal between
10/100 Base-TX and 100Base-FX fast Ethernet. It supports
10/100Base-TX and 100Base-FX applications. The data signal
converted by such high performance media converter can be
transmitted up to 120Km maximum by single fiber-optical cable.
The Converter is equipped one optic port and two RJ45 Jacks and
one external power supply receptacle. Four LED indicators are
built-in for easy diagnosing and monitoring the status of. It can be
configured automatically for Full Duplex or Half Duplex operation.
Packing List:
IT-PMC-1200 P2 is shipped with following items.
1. IT-PMC-1200 P2×1
2. 5VDC power adapter ×1(Media converter/5VDC)
3. User manual ×1
Advertisement
Table of Contents
Related Manuals for Intellisystem IT-PMC-1200 P2
Summary of Contents for Intellisystem IT-PMC-1200 P2
- Page 1 It can be configured automatically for Full Duplex or Half Duplex operation. Packing List: IT-PMC-1200 P2 is shipped with following items. 1. IT-PMC-1200 P2×1 2. 5VDC power adapter ×1(Media converter/5VDC) 3. User manual ×1...
-
Page 2: Pinout Configuration
5. Plug-and-play, easy to installation. 6. Can insert to 2U 19", 14 slots Rack (power external). Pinout Configuration: Power IT-PMC-1200 P2 adopt the power supply input is 5VDC external. Ethernet (RJ45), Optical fiber interface Optical fiber interface: Optical fiber interface: The optical fiber connection supports single-mode single fiber (1 ×SC, 1×FC, 1×ST, optional). - Page 3 Your Serial and Data Communications Expert Ethernet interface: 2-port Ethernet (RJ45) interface supports MDI/MDI-X auto negotiation, can use straight-through cable connect PC or server, use across-over connect cable Switch or HUB. MDI: PIN 1, 2, 3, 6 connects opposite. MID-X: 1→3, 2→6, 3→1, 6→2 MDI/MDI-X 10Base-T/100Base-TX PIN define as follow: MDI-X —...
- Page 4 Your Serial and Data Communications Expert MDI: RJ45 MDI-X: RJ45 (RX+) (TX+) (RX-) (TX-) (TX+) (RX+) (TX-) (RX-)
-
Page 5: Led Indications
Your Serial and Data Communications Expert LED indications: STATE INDICATION no link FX-ACT BRIGHT link is ok (Fiber Link Port) FLASH TX or RX activity no link BRIGHT link is ok TP1-ADD FAST transmitting or receiving at (Ethernet Port1) FLASH 100Mbps SLOW transmitting or receiving at... -
Page 6: Installation
Operating temp:-10°C to 65°C Storage temperature: -20 to 70°C Operating humidity: 5% to 95 % (no condensation) Warranty: 5 years Approvals: FCC, CE, RoHS approvals Applications: Extending 10/100M Ethernet data distance Installation: IT-PMC-1200 P2 provides DIN-rail and wall mounting two types of installation. - Page 7 Your Serial and Data Communications Expert Wall mounting installation...
-
Page 8: Troubleshooting Instructions
Your Serial and Data Communications Expert DIN-Rail Installation Troubleshooting instructions: 1.Make sure the power is connected and turned on. 2.Make sure the converter Ethernet and fiber optic cables are connected properly. 3.Check the connections according to the connection diagram. 4.Check the LED Indication status and identify possible problems from the Indication LED table above. -
Page 9: Common Problems
Your Serial and Data Communications Expert 4. After the warranty period, we will charge accordingly depending on the fault or dam age. 5. W henever there is a fault, you can contact our technical support after you identify the problem and the alarm. Common Problems: 1. - Page 10 Your Serial and Data Communications Expert Solution: 1. Check Ethernet (RJ45) line is link or not. 2. Check Ethernet (RJ45) port is loose. 3. Check the rate of selected media converter 4. Check the rate of Network. 5. Returned to the manufacturer for repair. 4.
Need help?
Do you have a question about the IT-PMC-1200 P2 and is the answer not in the manual?
Questions and answers