Table of Contents
Advertisement
Quick Links
IT-PMC-3010
10/100M Ethernet SFP Media Converter
(SM & MM)
1
Introduction:
The high performance Fiber Link Ethernet Extenders provide up to
120KM of Ethernet extension over single-mode fiber. The Model
3010 is ideal for campus networks, connecting remote LANs, and
facilitating the optical last-mile connection to the metropolitan-area
network (MAN) and beyond.
It provides a cost effective plug-and-play solution for long-range
10Base-T or 100Base-TX Ethernet extensions and added benefit of
10/100 auto-negotiation, making it the perfect choice when
planning future upgrades of 10Base-T networks. Ethernet Fiber
converters are ultra-miniature in size and feature a shielded RJ45
Ethernet jack,
SFP style
fiber-optic
connections.
Built-in
auto-sensing capabilities enable full or half-duplex Ethernet
operation with no configuration required!
Packing List:
IT-PMC-3010 is shipped with following items.
1. IT-PMC-3010×1
2. 5VDC power adapter ×1(Media converter/5VDC)
3. User manual ×1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Intellisystem IT-PMC-3010
Summary of Contents for Intellisystem IT-PMC-3010
- Page 1 RJ45 Ethernet jack, SFP style fiber-optic connections. Built-in auto-sensing capabilities enable full or half-duplex Ethernet operation with no configuration required! Packing List: IT-PMC-3010 is shipped with following items. 1. IT-PMC-3010×1 2. 5VDC power adapter ×1(Media converter/5VDC) 3. User manual ×1...
-
Page 2: Pinout Configuration
6. Can insert to 2U 19", 14 slots Rack (power external). Pinout Configuration: Power IT-PMC-3010 adopt the power supply input is 5VDC external. Ethernet (RJ45), Optical fiber interface Optical fiber interface: Optic fiber interface need use in pairs, OUT port is fiber send side, connect another long-range light of interface fiber receive end IN;... - Page 3 Ethernet interface: Ethernet (RJ45) interface supports MDI/MDI-X auto negotiation, can use straight-through cable connect PC or server, use across-over connect cable Switch or HUB. MDI: PIN 1, 2, 3, 6 connects opposite. MID-X: 1→3, 2→6, 3→1, 6→2 MDI/MDI-X 10Base-T/100Base-TX PIN define as follow: MDI-X —...
- Page 4 MDI: RJ45 MDI-X: RJ45 (RX+) (TX+) (RX-) (TX-) (TX+) (RX+) (TX-) (RX-)
-
Page 5: Led Indications
LED indications: Color Description Green ON:100Mbps OFF:10Mbps Green Blinking when fiber is Link/Act transmitting data Green Blinking when has data conflict Green ON:100Mbps OFF:10Mbps Green Blinking when fiber is Link/Act receiving data Green ON: power is ON Specifications: Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX RJ45 port rate: 10/100Mbps auto negotiation Optic port rate: 100Mbps... -
Page 6: Installation
Operating temp:-10°C to 65°C Storage temperature: -20 to 70°C Operating humidity: 5% to 95 %( no condensation) Warranty: 5 years Approvals: FCC, CE, RoHS approvals Applications: Extending 10/100M Ethernet data distance Installation: IT-PMC-3010 provides DIN-rail and wall mounting two types of installation. - Page 7 Wall mounting installation...
-
Page 8: Troubleshooting Instructions
DIN-Rail Installation Troubleshooting instructions: 1. Make sure the power is connected and turned on. 2. Make sure the converter Ethernet and fiber optic cables are connected properly. 3. Check the connections according to the connection diagram. 4. Check the LED Indication status and identify possible problems from the Indication LED table above. -
Page 9: Common Problems
5. W henever there is a fault, you can contact our technical support after you identify the problem and the alarm. Common Problems: 1. PWR power supply indicator lamp not lighting Cause: 1. Power supply not properly connected. 2. Protector tube damaged. 3. - Page 10 4. Check the rate of Network. 5. Returned to the manufacturer for repair. 4. Network packet loss Solution: 1. Check Ethernet rate or full/half duplex is matched or not. 2. Ethernet (RJ45) port is loose contact, or optic port is loose contact and soiled.
Need help?
Do you have a question about the IT-PMC-3010 and is the answer not in the manual?
Questions and answers