Table of Contents
Advertisement
2-3 Cabinet Installation
SVG300AXXA-11/SVG500AXXA-11
Before beginning installation, please check the appearance of the model and confirm there is no
visible damage. Please follow the installation instructions in the manual to ensure the safety of
both the product and personnel.
When taking out the cabinet from the carton, please note whether the base-fixing iron plates
(L-shaped iron plates) need to be used in conjunction. If the base-fixing iron plates are not
needed, they can be left on the carton's base when taken out (as shown in figure 1-8(b)).
When installing the cabinet, make sure it is installed in a place that is well ventilated and
dust-free. Do not let any fiber, paper scraps, sawdust, metal scraps, or other foreign objects
enter the Static VAR Generator or become attached to the cooling fans, as this will cause the
Static VAR Generator to not operate properly.
When installing the cabinet, the cooling distances are shown in figures 2-1a &2-1b.
1.
Head space: To ensure that the model achieves an Ingress Protection rating of IP54, the
2.
Back space: If the user's installation requires wires coming in from the top, enough space
3.
Side space: The cabinet door opens from left to right, therefore the side of the cabinet
SVG300&SVG500
Top s pac e
shortest distance for the space reserved for the replacement of the fans must be
at least 400mm (15.75 inches).
must be reserved behind the cabinet for the power cable to come in. The
shortest distance must be at least 200mm (7.87 inches).
cannot be placed directly against a wall; some space must be left on the side
for the doors to open. The shortest distance from the side to the wall must be at
least 275mm (10.83 inches), and the door must be able to open to at least
120°.
IP54
≥400mm
(15.75")
Bac k s pac e
Figure 2-1a
2-6
IP21/IP54
≥ 200mm
(7.87")
Advertisement
Chapters
Table of Contents
