Product Overview; Usage - Delta SVG300A43A-11 Quick Star

1-1 Usage

The Static VAR Generator is used to compensate harmonics depending on the harmonic and
the Static VAR Generator's compensation capacity so that compensation will not be affected
due to insufficient capacity.
An external harmonic current detection CT needs to be installed for the Static VAR Generator to
perform harmonic treatment.
To ensure the Static VAR Generator performs with maximum efficiency, please install the
device in a well ventilated environment and do not block or cover the air vents. Refer to Figure
2-1a/ 2-1b.
Please maintain the Static VAR Generator's operating ambient temperature at -10~45°C
(SVG300AXXA-XX model); -10~40°C (SVG500AXXA-XX model). Abnormal operation could
occur if the temperature exceeds this range.
Upon receiving the product, please first examine the carton for any signs of abnormal damage
during shipping. In such cases, please contact our local dealer or Delta sales immediately to
help with relevant matters.
Once you confirm that the Static VAR Generator's carton has no signs of abnormal damage,
remove the manual located on the carton and have a professional technician install the Static
VAR Generator according to the instructions.
After removing the carton, please check and make sure the product nameplate matches the
product model you purchased. Refer to 2-2-1 Description of Nameplate.
Please keep the operating environment dust-free. Do not allow any fiber, paper scraps, sawdust,
metal scraps or other foreign objects to enter the Static VAR Generator or attach to the cooling
fans, as this will cause the Static VAR Generator to operate abnormally.
When wiring the Current Transformer, please note the wiring positions for the input terminals
"K1, K2, K3" and the output terminals "L1, L2, L3". Please do not connect the wires to the wrong
terminals because the machine will not work.
This product complies with the following safety and EMC standards
International Standards
IEEE519-1992
IEC/EN61000-3-12
IEC/EN61000-3-4
IEC/EN61000-3-2
IEC/EN61000-2-2
IEC/EN61000-3-3
IEC/EN61000-2-4

01 Product Overview

TOR D2
G5/4
D-A-CH-CZ
Chinese National Standards
GB/T14549-93 (Quality of electric energy supply -
Harmonics in public supply networks)
SD 126-84 Provisional regulations on
management of power system harmonics
Regulations on the administration of electric
power dispatch to networks and grids
1-1
Product Overview