Using External Equipment; Listening To External Equipment - JVC UX-V10E Instructions Manual

Using External Equipment

AUX
AHB PRO
VOLUME +, –
Listening to External
Equipment
You can connect various external equipment.
For Hong Kong, the external equipment is used as playback and
recording device. For the other areas, it is used only as a playback
device.
First make sure that the external equipment is properly
connected to the System. (See page 4.)
1 Set the VOLUME control to the minimum
position.
2 Press the AUX button.
"AUX" appears on the display.
3 Start playing the external equipment.
4 Adjust the VOLUME control to the desired
listening level.
5 Apply sound effects, if you wish.
Press the AHB PRO button to reinforce the bass sound.
Press the BASS/TREBLE button on the Remote Control to
control the tone. (See "Controlling the Tone (Bass/Treble)" on
page 7.)
To exit from AUX mode, select another source.
Notes:
• For operation of the external equipment, refer to its
Instructions.
• For recording from the external equipment, refer to "Standard
Recording" on page 14.
16
FM AUTO
SLEEP DISPLAY
MODE PRESET
TAPE CD
AUX FM/AM
CD
REPEAT UP
PROGRAM SET
BASS
RANDOM DOWN
AHB
PRO BASS TREBLE CANCEL
TREBLE
VOLUME
REMOTE CONTROL RM-SUXV10E
STANDBY
AUX
AUX
REC
REV
MODE
TAPE
PHONES
DOWN MULTI CONTROL
Recording the System's
Source to External Equipment
(For Hong Kong only)
You can record the System's sources to external equipment which
is connected to the LINE OUT or OPTICAL DIGITAL OUT
terminals of the System, such as cassette deck or MD recorder, etc.
First make sure that the external equipment is properly
connected to the System. (See page 4.)
Play the System's CD Player or Cassette
Deck, or tune into a station.
The recording level is not affected by the VOLUME level. It is
not affected by any sound effect, either.
Note: For operation of the external equipment, refer to its
Instructions.
AHB
PRO AHB PRO
VOLUME
TIMER
VOLUME +, –
CLOCK
CD
OPEN/CLOSE
FM/AM CD
UP