Table of Contents
Advertisement
SAFETY INFORMATON
1.1 Operating Safety
l
NEVER operate this machine in application for which it is not intended.
l
NEVER allow anyone to operate this equipment without proper training. People operating
this equipment must be familiar with the risks and hazards associated with it.
l
NEVER operate this unit without all guards in place. Keep hands, feet, clothing and jewelry
away from the unit blades and all moving parts. Rotating and moving parts will cause
serious injury if contacted during operation.
l
DO NOT allow anyone to stank or lean on the unit during operation.
l
ALWAYS Keep the safety stop switch system in adjustment and good operating condition at
all times. Do not operate the trowel if it does not work properly. Out of control Trowels can
cause serious personal injury and damage to fresh concrete surfaces. This system will
automatically stop the unit if the operator loses control of it during operation.
l
ALWAYS make sure the safety stop switch is disengaged (lever in the down position) before
starting the unit. Keep one hand firmly on the handle while starting and do not let go of the
handle during operation.
l
ALWAYS wear protective clothing appropriate to the job site when operating the machine.
l
ALWAYS close fuel valve on engines equipped with one when machine is not being
operated.
l
ALWAYS store the machine properly when it is not being used. The machine should be
stored in a clean, dry location out of the reach of children.
1.2 Operator Safety while using Internal Combustion Engines
l
DO NOT smoke when refueling the engine or during any other fuel handling operation.
l
DO NOT refuel a hot or running engine.
l
DO NOT refuel the engine near an open flame.
l
DO NOT spill fuel when refueling the engine.
l
If fuel is spilled during refueling, wipe it off from the engine immediately and discard the rag
in a safe place. Do not operate the unit if fuel or oil leaks exist-repair immediately.
l
NEVER operate this equipment in an explosive atmosphere.
l
NEVER operate any gas powered equipment in a poorly ventilated or enclosed area.
l
NEVER perform any work on the unit while it is running. Before working on it, stop the
engine and disconnect the spark plug wire to prevent accidental starting.
l
Avoid prolonged breathing of exhaust gases.
l
Avoid contact with hot exhaust systems and engine parts.
l
Allow engine to cool before performing any repairs or service.
l
ALWAYS transport and handle fuel only when contained in approved safety containers.
l
ALWAYS keep the area around the muffler free of debris such as leaves, paper, cartons, etc.
A hot muffler could ignite the debris and start a fire.
2
Advertisement
Table of Contents
