Multibrackets M Public Video Wall Mount Push HD Nstallation And User's Manual page 6

➄
X axis adjustement knob
Y axis adjustement knob
Level
5.1
First hook bottom of the left monitor. Be careful to keep the knobs (X) between the brackets (S)
5.2
Check that the horizontal center of the monitor is alligned with the horizontal center of the
bracket.
5.3
Using a level allign the monitor parallel to the floor by using Z axel adjustment knob.
5.4
Using the Y axis regulation knob to ensure that every corner of the monitor is equidistant from
the wall.
5.5
Use a plumb for allign the first column of monitors taking at least 1mm between them.
5.6
Hook remaning monitors taking at leas 1 mm between them.
5.7
When the position adjustement of the monitor is finished if necessary tight the safety screws
previously losened.
Monitors allignement
www.multibrackets.com
Z axis adjustement knob
Y axis adjustement knob
Plumb