Compak CUBE TAMP Instruction Manual page 5

If it is necessary to
access the interior,
where the electrical
components are located, go to
the nearest technical service
In the event of
any component
breaking, or for
any intervention we
recommend contacting a
technical services centre,
who will carry out the repair
or replacement, guaranteeing
that safety standards are
adhered to.
Only an authorised
supplier may replace
the mains cable of
any machine.
NOTE: The manufacturer will not be liable for damages caused either
by the improper use of the device or by not following the stated safety
measures
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 01/09/2022 | K08021H09
USERS SHOULD PAY SPECIAL
ATTENTION TO AND SCRUPULOUSLY
OBEY THE FOLLOWING SAFETY
as it could cut the maintainer.
The use of suitable gloves
when handling it is
recommended.
tamper and the holder.
1.
INSTRUCTIONS
Any other use will be
considered improper
and dangerous
When maintaining the
coffee tamper, special
care should be taken
Do not insert any
part of the body
between the coffee
SAFETY
5