Compak CUBE TAMP Instruction Manual page 13

7.3. WHERE TO USE IT
The appliance must be installed on a
solid, flat surface.
The minimum size of the
workplace, to ensure the best
performance of the device, must
be at least the following:
Height
Width
Depth
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v. 01/09/2022 | K08021H09
mm
310
12.20
in
mm
188
7.40
in
mm
205
8.07
in
7.
INSTALLATION
7.4.
INSTALLATION
Before connecting the machine, check the
following:
• The characteristics on the data plate
match those of the electrical mains
network.
• The electrical connection plug
matches the socket into which it is to
be plugged.
• Ensure that the electrical power of
the facility is adequate for the power
consumed by the appliance.
• The point of connection to the
electrical mains network must be
protected with the appropriate
electrical protection device.
• The equipment must be correctly
connected to a ground connection
according to the current safety
regulations.
13