Working With Direct Monitoring: Adjusting The Input/Usb Balance - Connectivity ConnectAUDIO 2 User Manual

With Direct selected on the Touch Panel Display, Direct Monitoring can be toggled to Stereo Mode by
touching the 48V/Inst button. The Direct LED indicator will change from green to
now operating in stereo.
Refer to the Direct Monitoring States
figurations and their respective audio routing.

Working with Direct Monitoring: Adjusting the Input/USB Balance

With Direct Monitoring enabled, the meters on the Touch Panel Display toggle to show the respective
Input (left meter column) and USB (right meter column) levels. Moving the Rotary Control Dial adjusts the
balance between the two.
Rotate the dial clockwise for more USB signal in the monitor mix
l
Rotate the dial counter-clockwise for more Input signal in the monitor mix
l
2/4
ConnectAUDIO User Manual
Figure 3: Toggling DM from Mono to Stereo Mode
reference section of this manual to view all the possible DM con-
Figure 4: Adjusting the Direct Monitoring balance
red , indicating that DM is
16