Input Display States; Setting Input Levels - Connectivity ConnectAUDIO 2 User Manual

Condenser Mics
1. Touch 48V/Inst
2. Touch 1, 2 or both to assign the
play green

Input Display States

When you press the
l
to 48V mode.
When you press the
l
to Inst mode.
Note: Input audio is temporarily muted when 48V power is turned ON or OFF. Allow a few moments for
the audio path to be re-enabled when engaging or dis-engaging the 48V function.
Setting Input Levels
With input modes assigned, follow these steps to set input levels:
1. Touch the In button once to enable Signal Level metering mode
again to enable Gain Set metering mode
for more information about meter modes.
2. Touch 1 and/or 2 to select either or both inputs.
3. Turn the Rotary Control Dial to raise or lower the level of the selected inputs as you generate
source audio.
2/4
ConnectAUDIO User Manual
once, to set +48V
+48V
for inputs to which +48V
Figure 2: Input Assign mode;
48V/Inst button so that
48V/Inst button so that
(red
as the Input Mode. The LED indicator will display green.
Input Mode to an input. The LED indicator light will dis-
mode has been assigned.
48V mode assigned to Input 1
48V is selected, inputs that display
Inst is selected, inputs that display
(green
LED). Refer to the Input Meter Modes section below
green are assigned
green are assigned
LED). Touch the In button
14