Controls; Interactive Touch Panel Display; Meter Modes And Levels - Connectivity ConnectAUDIO 2 User Manual

Controls

Interactive Touch Panel Display

2/4
The ConnectAUDIO
lowing features:
Eight touch zones for intuitive control over viewing and adjusting Inputs and Outputs, Direct Mon-
l
itoring, and enabling +48V phantom power for condenser microphones
Dual 8-stage LED meters and independent metering modes for select functions
l
A Rotary Control Dial for setting gain/levels and adjusting the balance between inputs and USB
l
audio when in Direct Monitoring mode. The Rotary Control Dial also performs auxillary functions,
such as:
Commiting Gain Settings to Memory: While in Gain Set mode, press the dial once to com-
o
mit the current settings to memory
Powering down the unit: Press and hold the Rotary Control Dial until both meter columns
o
show red and yellow LED indicators at the top of the display. Then, release the Dial to power
the unit OFF. From the OFF state, press the Dial once to power the unit back ON.
Note: The Rotary Control Dial is continuous and can make fine or coarse adjustments depending on how
quickly you rotate the dial. Fine adjustments are recommended if there is a risk of signal overload.

Meter Modes and Levels

There are two primary meter display modes when selecting In, Out, or Phones on the panel. Successive
touches of the In, Out, or Phones buttons toggle between:
Signal Level mode, indicated by the
l
react to the input signal in real time.
Gain Set mode, indicated by the
l
clockwise or counter-clockwise motion of the Rotary Control Dial.
A third meter mode is activated when Direct Monitoring is selected on the panel. Refer to the
itoring section of this manual for more information.
2/4
ConnectAUDIO User Manual
's Interactive Touch Panel Display is a capacitive touch panel that provides the fol-
green
red LED. The LED meters display the gain setting and respond to
LED. The LED meters display VU (signal level) and will
Direct Mon-
10