ADF Web HD67F33-B2 Series Manual page 21

Industrial Electronic Devices
Figure 4c: "Downlink Rules" table
The means of the fields in the window "Uplink Rules" are the following:
If the field "Enable" is checked, the LoRaWAN rule is enabled;
In the field "Port" the port used for LoRaWAN communication is defined;
In the field "Start Byte" the starting byte of the LoRaWAN message to write from PROFINET is defined;
In the field "Number Bytes" the number of consecutive bytes to write from starting byte is PROFINET;
If the field "On Change" is checked, the LoRaWAN message is sent only when the data from PROFINET change;
If the field "On CMD" is checked, the LoRaWAN message is sent when a PROFINET request is received (not used);
If the field "On Timer" is checked, the LoRaWAN message is sent cyclically with the delay defined in
In the field "Position Byte" the address of PROFINET array from which taking the data is defined;
In the field "Mnemonic" a description of the LoRaWAN rule is defined.
ADFweb.com S.r.l.
User Manual PROFINET Slave / LoRaWAN Gateway
Document code: MN67F33_ENG
"Time
Revision 1.000 Page 21 of 28
(ms)" field;