ADF Web HD67F33-B2 Series Manual page 19

Industrial Electronic Devices
In the "LoRaWAN Gateway Devices
are:
If the field "Enable" is checked, the LoRaWAN end device is enabled;
In the field "Device EUI" the Device EUI for the LoRaWAN device is defined;
In the field "Join EUI" the Join EUI for the LoRaWAN device is defined;
In the field "Device Name" the name of the LoRaWAN device is defined;
In the field "Activation
In the field "Network Session
In the field "Application Session
In the field "Application
In the field "Device Address" the address of the LoRaWAN device is defined;
In the field "Class" the Class of the LoRaWAN device is defined;
In the field "Diag. TimeOut" the timeout in ms for LoRaWAN communication is defined. If the LoRaWAN messages are received for
this timeout, the correspondent bit for the diagnostic of PROFINET side is set to 1;
In the field "RX2 Datarate" the datarate used into the RX2 window is defined (optional).
In the field "Mnemonic" a description of the LoRaWAN device is defined.
Note:
It is recommended to set the "Diag. Timeout" with a higher time than the cyclic delay used by the LoRaWAN device to send data.
ADFweb.com S.r.l.
List", the list of LoraWAN end devices to connect is defined. The means of the fields for configuration
Method" the activation method for LoRaWAN device is defined;
Key" the Network session key for LoRaWAN connection is defined;
Key" the Application session key for LoRaWAN connection is defined;
Key" the Application key for LoRaWAN connection is defined;
User Manual PROFINET Slave / LoRaWAN Gateway
Document code: MN67F33_ENG Revision 1.000 Page 19 of 28