Homematic IP Compact Plus Mounting Instruction And Operating Manual page 54

BOOST
BOOST
MANU
6 12
18
MANU
Configuration menu
AUTO
6
12 18
BOOST
6.3
Offset
Offset
MANU
Prg
6.4
Prg
0 6
6
12 18 24
Mo Tu We Th Fr Sa Su
6.5
AUTO
Prg
6.6
BOOST
6
0
MANU
6.7
Prg
0 6
Mo Tu We Th Fr Sa Su
0 6
Mo Tu We Th Fr Sa Su
6.8
AUTO
Mo Tu We Th Fr Sa Su
AUTO
AUTO
BOOST
6.9
BOOST
Offset
MANU
BOOST
MANU
6:10
Prg
MANU
6:11
Offset
Offset
If you pair the device with the Homematic IP Access Point, you can
Prg
Offset
Prg
easily adjust the settings via the free Homematic IP app. After pairing
Prg
with the access point, the configuration menu on the device can no
longer be used.
If you have already adjusted the settings in the configuration menu,
or if you have already paired the device with another Homematic IP
device, you first have to restore the factory settings of the device
before you can pair it with a Homematic IP Access Point or a CCU3
(see see „10 Restoring factory settings" on page 65).
6.1 Automatic operation
In automatic mode, the temperature is controlled in accordance with the
set heating schedule. Manual changes are activated until the next point
at which the profile changes. Afterwards, the defined heating schedule
will be activated again. To activate the automatic mode, please proceed
as follows:
Press and hold the menu button (D) for approx. 2 seconds to
•
open the configuration menu.
Select "AUTO" using the plus and minus buttons (C + E).
•
54
24
24
Offset temperature
Programming a heating schedule
12
18 24
Date and time
Operation lock/PIN entry
12
18 24
Holiday mode
12
18 24
12
18 24
Direct pairing
Pairing with the access point
Restoring factory settings
Changing the PIN