Rear Panel - Denon SC5000 PRIME User Manual

Rear Panel

1. Power Input: Use the included power cable to
connect this input to a power outlet.
SC5000 PRIME has a protection circuit to safely
eject all media after an unexpected power loss to
protect your data from corruption. Reconnect your
power source to return to normal operation.
2. Power Button: Press this button to power SC5000
PRIME on or off. Power on SC5000 PRIME only after
you have connected all of your input devices and
before you power
loudspeakers. Power
loudspeakers before powering off SC5000 PRIME.
Press and hold this button for 10 seconds to reset
SC5000 PRIME.
3. Link Port: Use the included networking cable to connect this port to another SC5000 PRIME or to your
Denon DJ mixer. Each networked SC5000 PRIME can share track databases, timing and BPM
information, and other track data over this connection.
4. USB Port to PC (USB Out): Use a standard USB cable (included) to connect this USB port to an
available USB port on your computer. This connection sends and receives MIDI messages to and from
the computer.
5. Rear USB Ports 2/3: Connect standard USB drives to these USB ports. When you select one of those
USB drives as a source (press the Source button), you can use the display to select and load tracks on
your USB drives. There is also a similar USB port on the front panel.
6. Layer A/B Outputs: Use standard RCA cables to connect these outputs to your DJ mixer. The A Line
Outputs send out the audio signal from Layer A. The B Line Outputs send out the audio signal from Layer
B.
7. Digital Outputs A/B: Use standard digital coaxial cables to connect these 24-bit/96 KHz outputs to
devices and mixers such as the Denon DJ X1850 PRIME mixer.
8. Remote Input: Use a standard remote start cable to connect this input to the remote-start output of your
mixer (if available). While connected to a remote-start-compatible mixer, moving the crossfader toward
the side that corresponds to this SC5000 PRIME (or raising the channel fader for its channel) will
automatically start the track on the currently selected layer.
®
9. Kensington Lock Slot: Use this slot to secure SC5000 PRIME to a table or other surface.
on your amplifiers
off your amplifiers
8
6 7
and
and
9
2
5 4 3 1
13