Table of Contents
Advertisement
5. SAFETY FUNCTIONS
5.1 VOLTAGE DROP
In the event of a network voltage drop, the light will automatically switch off.
5.2 POWER CUTS
In the event of a total power cut, the light will switch off. As soon as voltage
is reestablished on the network, it can be turned on again using the most recent
established parameters.
5.3 ELECTRICAL MALFUNCTION
NOTE: In the event of this error, please contact the technical service.
6. CLEANING / DISINFECTION
6.1 GENERAL SAFETY INSTRUCTIONS
1. Disconnect the unit from the network before disinfecting it.
2. Never use an aerosol cleaner and/or disinfectant.
3. Do not spray liquid into sockets or slits on the unit or allow liquid to get into them.
4. Apply the cleaner by wetting a cloth, never by applying it directly to the device.
WARNING: ELECTRICAL SHOCK
The lighting units may transmit electricity and must be handled carefully during
cleaning and disinfection.
6.2 CLEANING
SAFETY
Check the general safety instructions.
RECOMMENDED CLEANING
1. Use a mild soap solution as a cleaning agent.
2. Thoroughly clean the surfaces with a dampened cloth, adding a bit of mild soap solution if
necessary.
3. Finally, thoroughly dry the exterior surface with a clean soft cloth (anti-static if necessary).
WARNING: RISK OF INFECTION AND CONTAMINATION OF USERS
Solvents could corrode the plastics. Strong acids, alkalies, and agents that contain
more than 60% alcohol could turn plastics brittle. Damaged parts could fall into open
wounds.
ENG
14
Advertisement
Table of Contents
