Operation Of The Lighting Unit; Check Before Each Use; Operation Of The Lighting Unit Head; Articulated Arms Measurement Details - MIMSAL LS User Manual

4. OPERATION OF THE LIGHTING UNIT

4.1 CHECK BEFORE EACH USE

1. Check if the unit is visibly deformed. If any deformities are detected, contact the Customer
Support Department immediately.
2. Make sure the lamp is in the required hygienic conditions for use.
3. Always check the correct operation of the whole unit before turning it on. The unit must
move in every degree of motion whilst verifying the main function and the control system.
Do not use the unit if there are any doubts about its electrical safety or static and
dynamic stability.

4.2 OPERATION OF THE LIGHTING UNIT HEAD

Lighting unit with simple and ergonomic operation for intuitive handling.
For LS LED, LS INFRA:
- The power switch is on the power cable.
- Select the switch position. I (On) | 0 (Off).
- Move the arm position to get an optimal lighting distance.
For LS INFRA TIMER:
- The timer is on the power cable at the bottom of the articulated arm.
- To turn on the lamp, select the required time by moving the selector clockwise to a position
between 0 and up to 15 minutes.
- To decrease the time selected, move the selector counterclockwise. Never move the selector
clockwise from 15 to 0.
- Once the time has elapsed and it reaches 0, the lamp will switch off.

4.3 ARTICULATED ARMS MEASUREMENT DETAILS

28 cm 39 cm
1. Minimum length
2. Maximum height
3. Maximum length
4. Minimun height
41 cm
89 cm
108 cm
ENG
13