Rail Plus Bracket - MIMSAL LS User Manual

3.4 RAIL PLUS BRACKET

REF
82026
Install the accessory without the lighting unit installed on it.
It is the customer's responsibility to ensure that the surface that it is attached to is
secure and sufficiently strong.
Check regularly that the unit is still stable in order to avoid the possibility of the
lighting unit falling down.
The bracket is only designed to support the weight of the lamp. If additional weight is
added, this may cause damage to the lighting unit and/or injury to the user.
Installation and assembly
- Loosen the adjustment screw via the wing screw (1).
- Fit the upper part of the support to the rail (2).
- The interior body of the support needs to be touching the rail (2).
- Tighten the wing screw until the support and the rail are firmly attached (3).
- Once the support is fixed and secure, position the lamp through the upper hole (4).
MODEL
RAIL PLUS BRACKET
DESCRIPTION
Bracket for mounting on an ICU rail.
ENG
11