Replacing Light Bulbs - Toyota LEXUS LS430 2005 Manual

64L230
2. Turn the vertical movement adjusting bolt 2 the same
number of turns and in the same direction as step 1 using a
Phillips−head screwdriver.
ELECTRICAL COMPONENTS

REPLACING LIGHT BULBS

The illustrations on the following pages show the locations of
light bulbs. If it is necessary to replace a bulb, take your vehicle
to your Lexus dealer as soon as possible. Use bulbs with the
bulb numbers and wattage ratings given in the table.
The tail and stop lights consist of a number of LEDs. If any LED
burns out, we recommend you take your vehicle to your Lexus
dealer to have the light inspected as soon as possible.
CAUTION
D To prevent burning yourself, do not replace the light
bulbs while they are hot.
D Halogen bulbs have pressurized gas inside and
require special handling. They can burst or shatter if
scratched or dropped. Hold a bulb only by its plastic
or metal case. Do not touch the glass part of a bulb
with bare hands.
D Do not touch the high voltage socket when the
headlights turn on. 20000 V is momentarily
generated and may cause severe injury by an electric
shock.
D Do not disassemble, repair or take apart the headlight
bulbs, connector, power supply circuits and rotated
components. Or you may be injured by electric
shocks. Call your dealer when the headlights fail to
work or have to be replaced or disposed of.
505