Rear Seat Position Memory System - Toyota LEXUS LS430 2005 Manual

OCCUPANT RESTRAINT SYSTEMS
When the registration is completed, one beep sounds. If the
key has already been registered, the previous memory will be
erased. If the same driving position profile for the same key is
registered in another button, that memory will also be erased.
CAUTION
Do not push the "LOCK" button any longer than 2 or 3
seconds. Pushing the button longer activates an alarm.
For details, see page 40.
Erasing the previous registration memory
The driver's door must be closed with the ignition switch in the
"OFF" position.
1. Keep the wireless remote control key in which you want
to cancel the registration in possession and push the
"SET" button.
2. Push the "LOCK" or "UNLOCK" button on the wireless
remote control key for about one second with the "SET"
button held down.
When the previous key ID memory is erased, two beeps
sound.
224
REAR SEAT POSITION MEMORY
SYSTEM
A microcomputer will memorize the position of the rear seats
and the height of the rear head restraints.
Recording the rear seat position in the computer's memory can
only be done when the ignition switch is in the "ON" position.
Setting the rear seat position
16L301a
1. Adjust the rear seat position and the height of the head
restraint of the rear seat to the desired position.
2. Keep pushing the "SET" button until a beep sounds.
The beep sound means that the position has been memorized.
The memory will be erased when the battery is removed for
inspection or service.