Μcom/Dsp Version Display Mode - Marantz AV7701 Service Manual

1. µcom/DSP Version display mode
1.1. Operation specifications
µcom/DSP version display mode:
When the set is started up in this mode, the version information is displayed.
Starting up:
Press the "ON/STANDBY ( X )" button to turn on the power while pressing the "STATUS" and "DISPLAY" buttons.
Now, press the "STATUS" button to the display the 2nd item information on the FL Display.
b When the version is displayed on the FL Display, the version list is also displayed on the GUI.
1.2. Display Order
Error information(Refer to 1.3. Error display) → q Model destination information → w Firmware Package Version
→ e Main µ-com/MAIN FBL(1st Boot Loader) Version → r Sub µ-com/Sub FBL → t DSP version → y Audio PLD
→ u GUI SFLASH → i Ethernet(DM860A) 1st Boot Loader, Hardware ID
→ o Ethernet(DM860A) 2nd Boot Loader → Q0 Ethernet(DM860A) IMAGE
→ Q1 Ethernet(DM860A)MAC ADDRESS information → Q2 HD RADIO SDK/HD RADIO BBP(SR7007U1B only)
→ Q3 MultEQ Pro APP(Displayed when Audyssey Pro is complete)
→ Q4 MultEQ Pro ICL(Displayed when Audyssey Pro is complete
q Model destination information :
Upper
A V 7 7 0 1
Lower
S / N .
w Firmware Package Version :
Upper
F i r m .
Lower
e Main µ-com & MAIN FBL version :
Upper
M a i n
Lower
M a i n
r Sub µ-com & Sub FBL :
Upper
S u b
Lower
S u b
t DSP ROM :
Upper
D S P
Lower
y Audio PLD :
Upper
A u d i o
Lower
u GUI SFLASH :
Upper
G U I
Lower
U
* * * * * * * * * *
P a c k a g e
V e r . : * * * *
: * * . * *
F B L : * * . * *
: * * . * *
F B L : * * . * *
: * * . * *
P L D : * * . * *
: * * * * * * * *
23
: * * * *