Cycling Computer Operations (Model Specific) - Blaupunkt FIENE User Manual

CYCLING COMPUTER OPERATIONS (MODEL-SPECIFIC) CYCLING COMPUTER OPERATIONS (MODEL-SPECIFIC)
C- CONTROL DISPLAY (Computer model no. 1) C- CONTROL DISPLAY (Computer model no. 1)
The control unit is integrated with the LC- The control unit is integrated with the LC-
Display and operates the drive system. It is Display and operates the drive system. It is
located on the handlebar. located on the handlebar.
Control Unit Function Overview Control Unit Function Overview
1.1 Power Button ON/ OFF 1.1 Power Button ON/ OFF
Hold Hold button for 2 seconds to switch button for 2 seconds to switch
on/o the LED control unit and electric drive on/o the LED control unit and electric drive
system. system.
The system will automatically turn o if left The system will automatically turn o if left
idling for more than 10 minutes. idling for more than 10 minutes.
1.2 Assist mode 1.2 Assist mode
Hold Hold or or buttons to select the buttons to select the
desired assist level for electric system. The desired assist level for electric system. The
lowest is Level 1 and the highest is Level 5. lowest is Level 1 and the highest is Level 5.
When powered on, the default is Level 1. When powered on, the default is Level 1.
When there is no numeric power level When there is no numeric power level
displayed it means the folding e-bike is in displayed it means the folding e-bike is in
park or it functions as a standard bike with park or it functions as a standard bike with
no assist from the motor. You will feel the no assist from the motor. You will feel the
electric assistance kicking in once selecting electric assistance kicking in once selecting
again between Levels 1 up to 5. again between Levels 1 up to 5.
23_06_2021 Anleitung-E-Bikes.indd 36
SAFETY NOTE: SAFETY NOTE:
engine can start if you are not yet safely on the engine can start if you are not yet safely on the
bike. Do not switch on the computer until you bike. Do not switch on the computer until you
have taken a seat on the folding e-bike or set have taken a seat on the folding e-bike or set
the support level to 0. Set the support to 0 the support level to 0. Set the support to 0
before getting o the bike. before getting o the bike.
1.3 Lights/ Backlit Button ON/ OFF 1.3 Lights/ Backlit Button ON/ OFF
With the display switched on, hold the With the display switched on, hold the
button for 2 seconds to turn on/ o the button for 2 seconds to turn on/ o the
headlight, taillight (model speci c) and the headlight, taillight (model speci c) and the
display backlight. There are ve levels of display backlight. There are ve levels of
backlight brightness that can be selected by backlight brightness that can be selected by
user. user.
1.4 Walk Assist 1.4 Walk Assist
The folding e-bike comes equipped with The folding e-bike comes equipped with
walk assist function. This feature propels walk assist function. This feature propels
forward your folding e-bike with a constant forward your folding e-bike with a constant
speed of 6km/h without pedaling and speed of 6km/h without pedaling and
requires nothing but to hold it balanced requires nothing but to hold it balanced
when walking along side it. It comes very when walking along side it. It comes very
handy when needing to push it up a steep handy when needing to push it up a steep
incline. incline.
Hold the Hold the
assist. This function remains activated as assist. This function remains activated as
:
long as you hold the long as you hold the
deactivates the moment you stop holding it. deactivates the moment you stop holding it.
SAFETY NOTE: SAFETY NOTE:
be used when the wheels are in contact with be used when the wheels are in contact with
the ground. Danger o njury may occur if push the ground. Danger o njury may occur if push
assist function is activated since the wheel will assist function is activated since the wheel will
start spinning. start spinning.
When you move the pedals, the When you move the pedals, the
button to activate the walk button to activate the walk
button and button and
Push Assist function should only Push Assist function should only
:
23.06.2021 10:11:10