Advertisement
CYCLING COMPUTER OPERATIONS (MODEL-SPECIFIC)
CYCLING COMPUTER OPERATIONS (MODEL-SPECIFIC)
C- CONTROL DISPLAY (Computer model no. 1)
C- CONTROL DISPLAY (Computer model no. 1)
BOTÓN +
BOTÓN
The control unit is integrated with the LC-
The control unit is integrated with the LC-
Display and operates the drive system. It is
Display and operates the drive system. It is
located on the handlebar.
located on the handlebar.
BOTÓN
Control Unit Function Overview
Control Unit Function Overview
1.1 Power Button ON/ OFF
1.1 Power Button ON/ OFF
Hold
Hold
button for 2 seconds to switch
button for 2 seconds to switch
on/o the LED control unit and electric drive
on/o the LED control unit and electric drive
system.
system.
The system will automatically turn o if left
The system will automatically turn o if left
idling for more than 10 minutes.
idling for more than 10 minutes.
1.2 Assist mode
1.2 Assist mode
Hold
Hold
or
or
buttons to select the
buttons to select the
desired assist level for electric system. The
desired assist level for electric system. The
lowest is Level 1 and the highest is Level 5.
lowest is Level 1 and the highest is Level 5.
When powered on, the default is Level 1.
When powered on, the default is Level 1.
When there is no numeric power level
When there is no numeric power level
displayed it means the folding e-bike is in
displayed it means the folding e-bike is in
park or it functions as a standard bike with
park or it functions as a standard bike with
no assist from the motor. You will feel the
no assist from the motor. You will feel the
electric assistance kicking in once selecting
electric assistance kicking in once selecting
again between Levels 1 up to 5.
again between Levels 1 up to 5.
23_06_2021 Anleitung-E-Bikes.indd 36
LC- CONTROL DISPLAY (Computer model no. 2)
LC- CONTROL DISPLAY (Computer model no. 2)
SAFETY NOTE:
SAFETY NOTE:
When you move the pedals, the
When you move the pedals, the
engine can start if you are not yet safely on the
engine can start if you are not yet safely on the
bike. Do not switch on the computer until you
bike. Do not switch on the computer until you
have taken a seat on the folding e-bike or set
have taken a seat on the folding e-bike or set
the support level to 0. Set the support to 0
the support level to 0. Set the support to 0
before getting o the bike.
before getting o the bike.
1.3 Lights/ Backlit Button ON/ OFF
1.3 Lights/ Backlit Button ON/ OFF
With the display switched on, hold the
With the display switched on, hold the
button for 2 seconds to turn on/ o the
button for 2 seconds to turn on/ o the
headlight, taillight (model speci c) and the
headlight, taillight (model speci c) and the
display backlight. There are ve levels of
display backlight. There are ve levels of
Control Unit Function Overview
Control Unit Function Overview
backlight brightness that can be selected by
backlight brightness that can be selected by
user.
user.
1.1 Power Button ON/ OFF
1.1 Power Button ON/ OFF
1.4 Walk Assist
1.4 Walk Assist
Hold
Hold
button for 2 seconds to switch
button for 2 seconds to switch
The folding e-bike comes equipped with
The folding e-bike comes equipped with
on/o the LED control unit and electric drive
on/o the LED control unit and electric drive
walk assist function. This feature propels
walk assist function. This feature propels
system.
system.
forward your folding e-bike with a constant
forward your folding e-bike with a constant
The system will automatically turn o if left
The system will automatically turn o if left
speed of 6km/h without pedaling and
speed of 6km/h without pedaling and
idling for more than 10 minutes.
idling for more than 10 minutes.
requires nothing but to hold it balanced
requires nothing but to hold it balanced
1.2 Assist mode
1.2 Assist mode
when walking along side it. It comes very
when walking along side it. It comes very
handy when needing to push it up a steep
handy when needing to push it up a steep
incline.
incline.
Hold
Hold
or
or
buttons to select the
buttons to select the
desired assist level for electric system. The
desired assist level for electric system. The
lowest is Level 1 and the highest is Level 3.
lowest is Level 1 and the highest is Level 3.
Hold the
Hold the
button to activate the walk
button to activate the walk
When powered on, the default is Level 1.
When powered on, the default is Level 1.
assist. This function remains activated as
assist. This function remains activated as
When there is no numeric power level
When there is no numeric power level
long as you hold the
long as you hold the
displayed it means the folding e-bike is in
displayed it means the folding e-bike is in
deactivates the moment you stop holding it.
deactivates the moment you stop holding it.
park or it functions as a standard bike with
park or it functions as a standard bike with
no assist from the motor. You will feel the
no assist from the motor. You will feel the
electric assistance kicking in once selecting
electric assistance kicking in once selecting
again between Levels 1 up to 3.
again between Levels 1 up to 3.
SAFETY NOTE:
SAFETY NOTE:
Push Assist function should only
Push Assist function should only
be used when the wheels are in contact with
be used when the wheels are in contact with
the ground. Danger o njury may occur if push
the ground. Danger o njury may occur if push
assist function is activated since the wheel will
assist function is activated since the wheel will
SAFETY NOTE:
SAFETY NOTE:
When you move the pedals, the
When you move the pedals, the
start spinning.
start spinning.
engine can start if you are not yet safely on the
engine can start if you are not yet safely on the
bike. Do not switch on the computer until you
bike. Do not switch on the computer until you
have taken a seat on the folding e-bike or set
have taken a seat on the folding e-bike or set
the support level to 0. Set the support to 0
the support level to 0. Set the support to 0
before getting o the bike.
before getting o the bike.
1.3 Lights/ Backlit Button ON/ OFF
1.3 Lights/ Backlit Button ON/ OFF
With the display switched on, hold the
With the display switched on, hold the
button for 2 seconds to turn on/ o the
button for 2 seconds to turn on/ o the
headlight, taillight and the display backli
headlight, taillight and the display backli
There are ve levels of backlight brightne
There are ve levels of backlight brightne
that can be selected by user.
that can be selected by user.
1.4 Information display
1.4 Information display
You can toggle between various
You can toggle between various
information, press
information, press
distance -> Total distance -> Trip duratio
distance -> Total distance -> Trip duratio
(hours)
(hours)
button and
button and
:
SAFETY NOTE:
SAFETY NOTE:
Only operate settings in case of parking the
Only operate settings in case of parking the
folding e-bike.
folding e-bike.
button to view: T
button to view: T
23.06.2021 10:11:10
Advertisement
Chapters
