Table of Contents
Advertisement
2. Installation
Please make sure that the wall or ceiling is strong enough to withstand 3 times the
weight of the camera. And install and use the camera in the dry environment.
1.
Loosen the fixed screw to disassemble the camera.
2. Unscrew the cover of the dome and then insert a micro SD card. After that, install
back the cover and make sure the cover is installed firmly.
3. Drill the screw holes and the cable hole on the ceiling according to the drill template.
Then route and connect the cables.
3
Advertisement
Table of Contents
Need help?
Do you have a question about the GV-IP Series and is the answer not in the manual?