GeoVision GV-IP Series Quick Start Manual page 3

Please read this instruction carefully before operating the unit and keep it for further

reference.
All the examples and pictures used here are for reference only.

The contents of this manual are subject to change without notice.

If the product does not work properly, please contact your dealer or the nearest service

center. Never attempt to disassemble the camera yourself. (We shall not be responsible
for any problems caused by unauthorized repair or maintenance.)
Do not allow water or liquid intrusion into the camera.

In the use of the product, you must be strict compliance with the electrical safety

regulations of the nation and region. When the product is mounted on wall or ceiling, the
device shall be firmly fixed.
Do not use camera beyond specified voltage range.

Do not drop the camera or subject it to physical shock.

The product must be grounded to reduce the risk of electric shock.

Avoid touching the camera lens.

If cleaning is necessary, please use clean cloth to wipe it gently.

Do not aim the camera at the sun or extra bright place.

Do not place the camera in extremely hot, cold (the operating temperature shall be -30°C

~ 60 °C (-22 °F ~ 140 °F), dusty or damp locations, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for operating environment.

Warning and Caution
i