Initial Settings; Language Setting; Clock Setting - JVC HR-VP49U Instructions Manual

– Connections and Plug&Play Setting –
HR-VP49U
Antenna or cable
Flat feeder
Matching transformer
AC power cord
Back of VCR
AC outlet
To audio/video
input connectors
To 75 terminal
TV
D
Perform Plug&Play setup
Plug the AC power code into an AC outlet. Do not turn on the
VCR. The clock and tuner channels will be set automatically. The
time and date can be set automatically by the clock setting data
transmitted from one of the regular TV broadcast channels. We
call this TV channel the "host channel" and it is a PBS channel in
your area.
ATTENTION:
If you use a cable box, Plug&Play will not function; set the clock
and tuner channels separately.
During Initial Auto Clock Set
"Aut" blinks.
During Auto Channel Set
The channel numbers are displayed as they are
scanned and set.
Plug&Play Completed
The current time is displayed.
What to do if Plug&Play setting failed
If an incorrect time is displayed on the display panel, perform
the "Semiauto Clock Set" or "Manual Clock Set" procedure.
If "–:– –" appears on the display panel, ensure that the antenna
cable is connected correctly. Then turn on and off the VCR; the
Plug&Play setting will be automatically reactivated. If Plug&Play
setting is not performed though the antenna cable is connected
correctly, perform "Manual Clock Set" and "Auto Channel Set"
or "Manual Channel Set".
Coaxial cable
(not supplied)
Audio/video cable
(not supplied)
RF cable
(supplied)
E
Set VCR channel
The VCR channel is the channel on which you can watch the
picture from the VCR on the TV when only using the RF
connection. Press POWER to turn off the VCR, then press STOP/
EJECT ( ) on the VCR for more than 5 seconds. "CH3"
0
appears on the display panel. Press CH+/– on the Remote to
select "CH3", "CH4" or "CH–"(OFF), then press OK.
The VCR channel is preset to "CH3". Set to "CH4" if CH3 is
used for broadcasting in your area.
F
Final preparation for use
Turn on the VCR and the TV, and select the VCR channel 3 or 4
(or AV mode) on the TV. You can now perform basic playback or
basic recording.

Initial Settings

Language Setting

The default setting is "ENGLISH".
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "INITIAL
SET", then press OK or .
e
B
Select language
This VCR offers you the language choice to
view menus and some messages — in
English, Spanish or French. Press
move the highlight bar (arrow) to
"LANGUAGE", then press OK or
repeatedly until the desired language is
selected.
Press MENU to return to normal screen.

Clock Setting

Perform clock setting only if the clock has not been set correctly
by the Plug&Play setting or if you use a cable box.
Preparations
A
Access Main Menu screen, then
Initial Set screen
Press MENU on the Remote. Press
move the highlight bar (arrow) to "INITIAL
SET", then press OK or .
e
B
Access Clock Set screen
Press to move the highlight bar
rt
(arrow) to "CLOCK SET", then press OK or
.
e
Setting clock semiautomatically
— Semiauto Clock Set
You can change the host channel/D.S.T. (Daylight Saving Time)/
time zone setting manually. First follow steps 1 1 1 1 to 2 2 2 2 in
"Preparations" above, then go to the following steps.
NOTE:
The time set previously will be erased when "AUTO CLOCK",
"HOST CH", "D.S.T." or "TIME ZONE" setting is changed.
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
to
rt
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
to
rt
SELECT WITH ( , ) AND (OK)
e
PRESS (MENU) TO END
MAIN MENU
FUNCTION SET
TUNER SET
INITIAL SET
to
rt
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
INITIAL SET
CLOCK SET
LANGUAGE ENGLISH
GUIDE CHANNEL SET
SELECT WITH ( , ) AND (OK)
PRESS (MENU) TO END