Table of Contents
Advertisement
Playback
Basic Playback
A
Load a cassette
Make sure the window side is up, the rear label side is facing you
and the arrow on the front of the cassette is pointing towards the
VCR.
● Do not apply too much pressure when inserting.
● The VCR turns on, and the counter on the on-screen display is
reset, automatically.
● If the cassette's record safety tab has been removed, playback
begins automatically.
B
Start playback
Press PLAY (
).
4
During playback
Stop playback
Press STOP (
) on the
8
Remote.
Pause playback and view still picture
Press PAUSE (
).
9
● Press PLAY (
) to resume normal playback.
4
NOTE:
During still picture, vertical vibration might appear on the TV
screen. Use the CH+/- to get a clearer picture. However, the VCR
will return to the default setting once a power failure occurs.
Pause and Frame-by-Frame playback
Press PAUSE (
) to pause, then press
9
repeatedly.
● Press PLAY (
) to resume normal playback.
4
High speed search
Press REW (
) or FF (
3
5
● Press PLAY (
) to resume normal playback.
4
● If you press and hold REW (
2 seconds, simply releasing it cancels the picture search, and
normal playback resumes.
Picture search at variable speed (including slow-motion)
Press
or
repeatedly.
2
6
● Press PLAY (
) to resume normal playback.
4
● Each time you press
or
2
To decrease the speed during picture search, press the opposite
direction button repeatedly.
● During still picture, press and hold
motion playback (or
2
playback). When you release the button, still picture resumes.
During still picture, holding PAUSE (
2 seconds also starts forward slow motion playback. If you
press PAUSE (
) again, still picture resumes.
9
NOTE:
During slow motion picture, some noise might appear on the TV
screen. Use the CH+/- to eliminate the noise. However, the VCR
will return to the default setting once a power failure occurs.
OR Press STOP/EJECT (
0
the VCR.
or
(or PAUSE (
2
6
).
) or FF (
) for more than
3
5
, the playback speed changes.
6
to start forward slow
6
to start reverse slow motion
) for more than
9
Reverse
Reverse
Reverse
search
play
3 steps
When the tape is not running
Rewind/fast-forward
Press REW (
3
Eject the tape
Press STOP/EJECT (
● You can also eject the cassette when the VCR is turned off.
Turn off the VCR
Press POWER (1).
Playback Features
Adjusting tracking condition
— Tracking Adjustment
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic tracking
starts working and continuously analyzes the signal to enable
optimum picture quality during playback.
) on
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, follow the procedures below.
A
Press SP/EP on the Remote during playback to activate manual
tracking.
B
Press CH + and – to eliminate the noises. Press it briefly for a
fine adjustment, or press and hold for a coarse adjustment.
Press SP/EP on the Remote again to reactivate automatic
tracking.
Selecting monitor sound
))
9
— Audio Monitor
While playing back a tape on which stereo sound or SAP sound is
recorded, press A. MONITOR on the Remote. Each time you press
the button, sound changes.
HI-FI: Normally select this. Hi-Fi sound is played back.
HI-FI L: Sound on the left Hi-Fi channel is played back.
HI-FI R: Sound on the right Hi-Fi channel is played back.
NORM: Sound on the normal track is played back.
NORM HI-FI: Both sounds on the Hi-Fi track and normal track are
mixed and played back.
NOTE:
The above indication appears when "SUPERIMPOSE" is set to
"ON", though the monitor sound changes in sequence.
Automatic operations after rewinding
— Next Function Memory
The Next Function Memory "tells" the VCR what to do after
rewinding is complete. Ensure that the VCR is in stop mode.
● For Automatic Playback Start
Press REW (
3
● For Automatic Power Off
Press REW (
3
● For Automatic Timer Standby
Press REW (
3
NOTE:
It is not possible to select the Automatic Timer Standby function if
the cassette's record safety tab is removed.
Reverse
Slow
Normal
slow
motion
motion
2 steps
2 steps
) or FF (
).
5
).
0
), then press PLAY (
) within 2 seconds.
4
), then press POWER within 2 seconds.
), then press TIMER within 2 seconds.
Forward
Forward
play
search
4 steps
Advertisement
Table of Contents
