Table of Contents
Advertisement
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each
drawing refers to the key number of the part, from the PART LIST on page 12. The second number refers to the
quantity used in assembly. Note: If a part is not found in the parts bag, check to see if it has been
preassembled.
M10 Locknut (15)–8
M4 x 12mm Console
Screw (22)–4
M8 x 19mm Button
Head Bolt (21)–2
M8 Lock Washer (23)–2
M4 x 16mm Screw (27)–4
M10 x 82mm Carriage Bolt (24)–2
4
M4 x 10mm Screw (28)–8
M10 x 40mm Bolt (25)–2
Advertisement
Table of Contents
