Subroutine 43 - Meas_Jog (Measurement In The Jog Mode) - Siemens SINUMERIK 808D ADVANCED T User Manual

Local variable definition
Table 3-9 Inputs
Name
DELAY
DrvEn
SP_EN
IsBrake
Table 3-10 Outputs
Name
SP_brake
SP_LED
Assigned global variables
SP_B_CMD
T11
Relevant PLC machine data
No.
14510 [13]
14512 [19].1
Example for calling subroutine 42
3.16

Subroutine 43 - MEAS_JOG (measurement in the JOG mode)

Purpose
Subroutine 43 is used to process the information from the measuring probe and to realize the "measuring in the JOG mode"
function. You can use this subroutine to calibrate the probe and measure a tool.
The precondition for calling this subroutine is to call subroutine MCP_NCK (SBR38) in the main program. The "measuring in
the JOG mode" function is automatically deactivated if you have changed the operating mode when the function becomes
active.
Local variable definition
Table 3-11 Inputs
Name
Meas_Enable
44
Type Description
WORD Spindle braking duration (unit: 0.1 s)
BOOL Drive enable
BOOL Spindle action condition (1: allowed; 0: not allowed)
BOOL Spindle braking function (1: enabled; 0: forbidden)
Type Description
BOOL Spindle braking output
BOOL Spindle running state
BOOL Spindle braking command
TIMER Spindle braking timer
Type
BOOL
BOOL
Type Description
BOOL Activating the function of "measuring in JOG mode"
Description
Spindle braking duration (unit: 0.1 s)
Selection of spindle braking function (1: enabled; 0: forbidden)
PLC Subroutines Manual
6FC5397-0FP40-0BA0, 08/2013