Connecting Speakers - JVC SP-MXJ100J Instructions Manual

AM antenna
AM
AM loop antenna
(supplied)
1
Connect the AM loop antenna to the AM
LOOP terminals as illustrated.
2
Turn the AM loop antenna until you have the
best reception.
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
ANT

Connecting Speakers

You can connect a pair of the front speakers.
1
Black
Speaker
cord
Right
speaker
1
Press and hold the clamp of the speaker
terminal on the rear of the unit.
2
Insert the end of the speaker cord into the
terminal.
Match the polarity of the speaker terminals: Red (+) to
red (+) and black (–) to black (–).
3
Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
– 7 –
2, 3
SPEAKERS
IMPEDANCE 6-16 OHMS.
+
L
Red
–
–
Speaker
R
cord
+
Left
speaker