Playing Back Cds; Loading Cds - JVC SP-MXJ100J Instructions Manual

Playing Back CDs

Loading CDs

1
Press 0 OPEN/CLOSE on the
unit.
The unit automatically turns on and the
carousel comes out.
2
Place one or two discs correctly on the front
slots of the carousel, with its label side up.
CORRECT
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
If you wish to load a third disc, press
DISC CHANGE on the unit (or
DISC SKIP on the remote control).
The carousel rotates by 120˚.
4
Press 0 OPEN/CLOSE again.
The carousel closes, and the corresponding
disc number indicator (disc 1 to disc 3) lights
up on the display.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
1
Disc number
• The disc indicator flashes while the corresponding CD is currently
selected.
• The disc indicator goes off when the unit has detected that there is
no CD on the corresponding disc tray.
OPEN / CLOSE
INCORRECT
DISC CHANGE
DISC SKIP
OPEN / CLOSE
2
3
Disc indicator
Playing Back CDs
You can play CDs continuously.
1
Load CDs.
2
Press REPEAT on the unit
(or REPEAT on the remote
control) to select a play mode
you want.
Each time you press the button, play modes
change as follows:
ALL CD
REPEAT ALL CD
ALL CD: Plays all loaded CD. (When you turned on
the unit, "ALL CD" is automatically
selected.)
1CD: Plays back one CD.
REPEAT 1: Repeats one track on one CD.
REPEAT ALL CD: Repeats all the tracks on all the CDs ,
or all the tracks in the program.
REPEAT 1CD*: Repeats all the tracks on one CD.
*REPEAT 1CD is not used for Program play.
3
Select the disc you want to
start play from.
On the unit :
Press one of the disc number
buttons (CD 1, CD 2, and CD 3).
On the remote control :
Press DISC SKIP repeatedly.
CD play starts from the first track of the selected disc.
Disc No.
2
flashes
1
Track number
• Pressing CD 6 instead of the disc number buttons
starts playing back if a CD is on the trays.
To stop during play, press 7.
To stop play for a moment
Press CD 6.
2
1
"PAUSE" appears on the display.
To resume play, press CD 6 again.
To remove the disc, press 0 OPEN/CLOSE.
– 12 –
Continued
REPEAT
REPEAT 1
1 CD
REPEAT 1CD
1
CD
CD
DISC SKIP
Elapsed playing time
VOL
REPEAT
3
2
CD
VOL
CD