Advertisement
Milestone, Rally, Stance
T, TT, X & 4X Bases, Standard, Folding, Flip Top
1
Hardware Included:
#12 x 1
Pan Head Screw
Step 1:
Place the table top upside down on a clean, padded surface.
Step 2:
Center leg assembly on underside of top and attach using #12 x 1" PH Screws (do not over tighten).
* NOTE:
Multiple leg bases attach the same as single leg bases.
Assemble tables only as described in this
!
guide. All fasteners must be tightened
securely and checked regularly. Failure to
CAUTION
do so could cause instability and injury.
Tools Required:
• #3 Phillips Head Screwdriver
2
Tables
Advertisement
Table of Contents
Related Manuals for Media Technologies Milestone T
Summary of Contents for Media Technologies Milestone T
- Page 1 Milestone, Rally, Stance T, TT, X & 4X Bases, Standard, Folding, Flip Top Tables Hardware Included: Tools Required: • #3 Phillips Head Screwdriver #12 x 1 Pan Head Screw Step 1: Place the table top upside down on a clean, padded surface. Step 2: Center leg assembly on underside of top and attach using #12 x 1"...
- Page 2 2. Assembly Kit includes 1 – 5/32 Ball End Allen Wrench Extension Tool. 3. Set FLIP-N-FOLD mechanism on a flat surface. 4. Set leg on mechanism. See images below for C and T bases. Milestone, Rally, Stance 5. Use 5/32 Ball End Allen Wrench Extension ( in assembly kit) and battery operated hand drill to run 4 flat head screws (provided) into place.
Need help?
Do you have a question about the Milestone T and is the answer not in the manual?
Questions and answers