Cables - opto engineering LTBRZ3-C Series Instruction Manual

LTBRZ3-C series | INSTRUCTIONS MANUAL
Important notes:
Do not use output connector as power and control source.
Supply + control
In daisy-chain configuration, do not connect more than 4 modules.
Without respecting these notes, product damage may occur and warranty will be void.

10.2 Cables

The illuminator is provided without cables. Appropriate cable must be ordered separately according
to the table below.
Part
number
Illumination cable PVC black, side 1 M12 female connector straight, side 2 cable
CBLT014
end, 5 ways, 5m length
Illumination cable PVC black, side 1 M12 female connector right angled, side 2
CBLT015
cable end, 5 ways, 5m length
Illumination jumper cable PVC, side 1 M12 male connector straight, side 2 M12
CBLT016
female connector straight, 5 ways, 0.5m length
Illumination jumper cable PVC, side 1 M12 male connector straight, side 2 M12
CBLT017
female connector straight, 5 ways, 1m length
Illumination jumper cable PVC, side 1 M12 male connector straight, side 2 M12
CBLT018
female connector straight, 5 ways, 2m length
V 1.00 - eng
Description
Table 3: available cable list.
Supply + control
8