Table of Contents
Advertisement
LTBRZ3-C series | INSTRUCTIONS MANUAL
9.
General description
The LTBRZ3 is a 300mm linear LED illuminator featuring an integrated low ripple constant current
driver. LTBRZ3-C is designed for continuous mode operation. NPN or PNP triggers can be used to
turn on and off the light. Light intensity can be adjusted by 0-10 VDC analog intensity line or set
manually by an external accessible potentiometer. The LTBRZ3-C can be connected forming a
daisy-chain configuration composed by a maximum number of 4 modules.
10.
Electrical specifications
10.1 Illuminator connectors and daisy chain option
The LTBRZ without daisy chain option is equipped with a single M12 A-type circular industrial male
connector. With a single input connector, the product is design to operate as a stand-alone module.
The single connector acts as input port for both power supply and control signals.
Input connector
The LTBRZ with daisy chain option (-DC) is design to operate as stand-alone unit or connected
together with multiple units. The product is equipped with two M12 A-type circular industrial
connectors. The input connector is male, while the output connector is female. The purpose of the
output connector is to let multiple units being connected together.
Input connector
V 1.00 - eng
Figure 1: LTBRZ3 with input connector.
Output connector
Figure 2: LTBRZ3 with input and output connectors.
6
Advertisement
Table of Contents
