Escaping A Screen Without Saving Changes; Exiting The Pck Configuration Menu; Selecting An Option (Parameter) From A List Of Options - Symbol MK1000 Product Reference Manual

Escaping a Screen Without Saving Changes

If you have accidentally entered a screen and wish to exit it WITHOUT making ANY
changes, scan the Cancel bar code on
Note: Some screens may require scanning the Cancel bar code twice, or
scanning a numeric bar code selection.

Exiting the PCK Configuration Menu

When all desired changes are made, scan the Exit and Save Changes bar code on
B-3 to exit PCK emulation configuration.

Selecting an Option (Parameter) from a List of Options

To select an parameter from a list, scan the numeric programming bar code in
PCK Configuration Programming Bar Codes
select.
For example, to change the communication interface to wired Ethernet, navigate the main
menu and make your communication interface selection as follows:
1. Scan the Enter PCK Configuration Menu bar code to access the PCK
Configuration menu.
2. Scan the number "1" bar code to access the Select Interface Type screen.
3. Scan the number "1" bar code to choose Wired Ethernet (10BaseT) as your
communication interface.
4. When the number "1" bar code is scanned and Wired Ethernet (10BaseT) is
selected, you are returned to the PCK Configuration menu.
5. Continue with additional changes by scanning the appropriate numeric bar code to
access another screen, or to initiate operation of the MK1000 in PCK emulation
mode, scan the Save & Exit bar code.
Note: Scan the Cancel bar code to exit WITHOUT saving ANY of your
changes.
Setup and Installation: Communication
page B-5.
that corresponds to the parameter you wish to
page
Appendix B,
3-7