Supra LESTO SC02 Instructions For Use Manual page 8

EN
(Original instructions)
Towel fan heater
LESTO SC02
DESCRIPTION
A. LCD screen
B. Buttons
C. Grid
D. Heating bars
E. Anti-dust filter
F. On/Off switch
CONTROL PANEL ICONS
a. On/Off button
b. Towel heating
c. Button Mode
d. Weekly program mode
e. Timer
f. Body detector
g. Power
h. Increase
i. Decrease
j. Window opening detection
LCD SCREEN FUNCTIONAL ICONS
I. M= Monday ... S=Sunday
II. Modes (1000W or 2000W)
III. Anti-frost mode
IV. Heating bars
V. Window opening detection
VI. Body sensor
VII. Timer
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE
Fully extend the appliance's power cable
before each use.
Do not use the appliance if the on/off switch
does not work.
Do not use the appliance if it is tipped up and
do not turn it over.
Do not turn the appliance over while it is in use
or connected to the mains.
If you use the appliance in a bathroom or
3-EN.indd 1 3-EN.indd 1
similar place, unplug the appliance from the
mains when it is not in use, even if it is only for
a short while, as proximity to water involves a
risk, even if the appliance is disconnected.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
Do not store the appliance if it is still hot.
Do not store the appliance on areas where the
temperature could be lower than 2ºC.
Make sure that dust, dirt or other foreign
objects do not block the fan grill on the
appliance.
Never leave the appliance unattended while
in use.
Never leave the appliance connected and
unattended if is not in use. This saves energy
and prolongs the life of the appliance.
Do not use the appliance to dry pets or
animals.
Do not use the appliance to dry textiles of any
kind.
CAUTION: User can't sleep when appliance is
under use; there is a risk of injuries.
ASSEMBLING THE WALL BRACKET
The appliance has a wall bracket (Fig.5) on
which it can be supported.
Fix the wall bracket as you think appropriate,
using screws
Taking into account the separation distances
mentioned above, place the wall support in the
required position and mark the drilling points
on the wall. (Fig.5).
Drill into the wall where marked and insert the
rawlplugs. (Fig.5).
Place the support by matching the holes with
the rawlplugs and screw in firmly. (Fig.5).
Make sure that the bracket is firmly fixed; it
should be able to support twice the weight of
the appliance.
Fit the appliance into the wall support.
INSTRUCTIONS FOR USE
BEFORE USE
Make sure that all products' packaging has
been removed.
Some parts of the appliance have been
lightly greased. Consequently, the first time
31/3/22 18:25 31/3/22 18:25