Supra LESTO SC02 Instructions For Use Manual page 10

When the towel rack is turned on, icon will be
illuminated on the screen and towel rack start
heating at 45W.
The towel rack heating function can work
independently.
The working period is 2hours.The towel will
stop automatically, and icon (IV) disappear
from the screen
BODY SENSOR
Press button (f) to turn on body sensor, icon
will be illuminated on the screen. Press again
to turn it off, and the icon disappear on screen.
When body sensor works, if there is no detection
at 3 meters during 15 minutes, appliance will
stop heating automatically.
WINDOW SENSOR
-Press the button (j) to activate the window
sensor function.
- When the device detects that the temperature
decreases 5°C in 30 minutes, it automatically
stops emitting heat.
FILTER
After 150 hours of use, turn the appliance off
(F), then remove the filter on the back of the
appliance. Clean the filter directly under water.
Do not use caustic or abrasive material during
cleaning, as this can damage the filter.
After the filter is dried naturally, reassemble it
to the appliance
Stand-by function
To turn it on again, you simply have to press
the on/off button (a)
To return to normal operation simply press the
appliance's on/off button (a)
In order to save energy, the appliance passes
to stand-by when the product detect a drop
over 5°C within 30 minutes. Then it will stop
heating and enter into stand by mode
To return to normal operation simply press the
button (j).
Once you have finished using the appliance
Turn the appliance off using the on/off button
(a).
Turn the appliance off, using the on/off switch
(F).Unplug the appliance from the mains.Let
the device cool down.Clean the appliance.
Safety thermal protector
3-EN.indd 3 3-EN.indd 3
The appliance has a safety device, which
protects the appliance from overheating.
When the appliance switches itself on and
off repeatedly, for reasons other than the
thermostat control, check to ensure that there
are no obstacles that impede correct air entry
or expulsion.
If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
Cleaning
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance's
useful life and could become unsafe to use.
Remark: When the appliance is used as a
heater after long periods in storage or after
having been used solely as a fan a small
amount of smoke may be produced. This is
not important and is due to the heater burning
dust deposits which have accumulated on the
heating element. This phenomenon may be
avoided by cleaning the inside of the appliance
beforehand through the grill with a vacuum
cleaner or pressurised air.
31/3/22 18:25 31/3/22 18:25