Operating Other Components - JVC RX-554RBK Instructions Manual

Operating Other Components

You can operate JVC audio and video components with this receiver's remote control.
To operate these components with the remote control, first select a source with the source buttons on the
remote control. Then, operate that source using the remote control.
IMPORTANT:
To operate JVC audio components using this remote control:
• You need to connect JVC audio components through the COMPU LINK-3
(SYNCHRO) jacks (see page 37) in addition to the connections using cables with
RCA pin plugs (see page 7).
• Aim the remote control directly at the remote sensor on the receiver.
7 7 7 7 7 After pressing TUNER/BAND, you can perform the
following operations:
TUNER/BAND Alternates between FM and AM (MW/LW).
1 – 10, +10 Selects a preset channel number directly.
For channel number 5, press 5.
For channel numver 15, press +10, then 5.
For channel number 20, press +10, then 10.
For channel number 30, press +10, +10
then 10.
RDS operating buttons
PTY SEARCH Starts and ends searching a broadcast
using the RDS.
PTY SELECT +/– Selects a program type.
DISPLAY Changes the RDS display mode.
7 7 7 7 7 After pressing CD, you can perform the following
operations on the CD player:
3
Starts playing.
4
Returns to the beginning of the current (or
previous) track.
¢
Skips to the beginning of the next track.
7
Stops playing.
8 Pauses. To resume playing, press 3.
1 – 10, +10 Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5. For
track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
7 7 7 7 7 After pressing CD-DISC, you can perform the following operations on the
CD changer:
1 – 6, 7/P Select the number of a disc installed in a CD changer.
Then continue to operate the CD player as described above.
For example: To find a track number 11 of disc 4
1. Press CD DISC.
2. Press 4.
3. Press CD.
4. Press +10, then 1.
7 7 7 7 7 After pressing TAPE, you can perform the following operations on the
cassette deck:
3
Starts playback.
4
Fast winds a tape from right to left.
¢
Fast winds a tape from left to right.
7
Stops operation.
8 Pauses. To resume playing, press 3.
Note:
If you choose a source on the front
panel, the remote control will not
operate that source.
TV VCR AUDIO
CD
DAP MODE 3D-PHONIC SURROUND
TAPE
1 2 3
TUNER/
EFFECT DELAY TEST
BAND 4 5 6
– +
SEA MODE REAR
VCR
7/P 8 9
– +
CENTER
SEA
VIDEO
10 +10
PRESET
SOUND
PHONO ONE TOUCH
CONTROL CD-DISC
OPERATION
– + – +
TV CH VCR CH
– + PTY SEARCH DISPLAY
TV VOL.
TV/
VIDEO
– +
PTY SELECT
– +
MUTING
VOLUME
RM-SR554RU REMOTE CONTROL
Note:
If you press SOUND CONTROL,
you cannot operate the cassette
deck with this remote control. If
this happens, press TAPE again,
so operating buttons for audio
components will work for the
cassette deck.
38