Table of Contents
Advertisement
Operating other
JVC products
You can use the supplied remote control to operate not only
this receiver but also other JVC products.
• Refer also to the manuals supplied with the other products.
– Some JVC VCRs can accept two types of the control
signals—remote codes "A" and "B." This remote control can
operate a VCR whose remote control code is set to "A."
– Some JVC DVD recorders can accept four types of the control
signals. This remote control can operate a DVD recorder
whose remote control code is set to the initial code. For
details, refer to the manual supplied with the DVD recorder.
• To operate other products, aim the remote control directly at the
remote sensor on the target product.
7 TV
1
2
4
5
7
8
10
0
You can always perform the following operations:
TV VOLUME +/–:
Adjust the volume on the TV.
TV/VIDEO:
Change the input mode (either video
input or TV tuner) on the TV.
After pressing TV, you can perform the following operations on the
TV.
STANDBY/ON
Turn on or off the TV.
TV/DBS/CATV:
CHANNEL +/–:
Change the channel numbers.
1 – 9, 0, 100+:
Select the channel numbers.
RETURN (10):
Switch between the previous channel
and the current channel.
34
3
6
9
10
7 VCR
1
2
4
5
7
8
10
0
You can always perform the following operation:
STANDBY/ON
Turn on or off the VCR.
VCR:
After pressing VCR, you can perform the following operations on
the VCR.
CHANNEL +/–:
Change the channel numbers on the
VCR.
Start playback.
3:
Stop playback.
7:
Pause playback. To release it, press 3.
8:
FF:
Fast-wind a tape.
REW:
Rewind a tape.
REC PAUSE:
Enter recording pause. To start
recording, press this button then 3.
3
6
9
10
Advertisement
Table of Contents
