Leakomatic Pro1 User Manual page 18

Event high
Threshold high
Event low
Threshold low
Hysteresis
Output handling
AUX out active
AUX out when
Flow Test control
Quick Test control
Tightness Test
control
Volume Test
control
RESTART
There are various ways to restart the screen:
• Through the menu. The text
is restarted.
• By turning the device off and on again.
18
Specify if a warning or an alarm will appear when
"Threshold high" is exceeded.
Specify the measurement value at which an alarm
will appear when the value is exceeded.
Specify if a warning or an alarm will appear when
"Threshold low" is exceeded.
Specify the measurement value at which an alarm
will appear when the value is not attained.
Specify here how far the value will drop below the
Threshold high or go above the Threshold low before
an active warning is acknowledged automatically.
Indicates whether the AUX output is open or closed
when activated. If disabled, output will not be
activated during activities.
Indicates if output will be activated when the device
is in Home or Away mode. Alternatively, you can set
the connection to activate in case of a warning or an
alarm.
Specifies whether the relay output will be activated
on Flow Test alarm.
Specifies whether the relay output will be activated
on Quick Test alarm.
Specifies whether the relay output will be activated
on Tightness Test alarm.
Specifies whether the relay output will be activated
on Volume Test alarm.
"Restart"
will be shown on the screen and the device
Disabled/
Warning/
Alarm
Disabled/
Warning/
Alarm
Disabled/
Open/
Closed
Home/
Away/
Warning/
Alarm
Enabled/
Disabled
Enabled/
Disabled
Enabled/
Disabled
Enabled/
Disabled